Xhorse Multi-Prog ECU TCU Programmer Upgrade Of VVDI Prog with Free MQB48 License

  • $800.00
    Unit price per 


Xhorse Multi-Prog ECU Programmer Product Description:

  1. Xhorse Multi-Prog Programmer ECU Programmer
  2. Firmware can be updated yourself by "update kit"
  3. Support self-test and smart operation mode
  4. Read BMW ISN and NEC, MPC, Infineon etc chip

Advantages of Xhorse Multi-Prog ECU Programmer:

  1. Built-in update software: Make Multi-Prog firmware update timely.
    2. High-speed USB communication interface: 
    Make software automatically connect.
    3. Smart operation mode: 
    Possible causes of error will be listed.
    4. Reserve ports: 
    For future update.
    5. Self-test function: 
    Check if the machine works well or not.
    6. Power supply: 
    Through USB cable, software will automatically prompt if the external USB power supply is needed.
    7.Get free BMW ISN:
     Read function and NEC, MPC, Infineon etc chip continously update service

Xhorse Multi-Prog Functions:

Read, Write and Clone ECU
BMW B48/B58 reading ISN 
BMW MSD80/81 /85/87/MSV90
Mercedes-Benz SIM271
BMW MSV80
V-W BOSCH MED17 Series ECU 
BMW N13/N20/N55/B38/TC17X
Support Marelli, Siemens, Delphi and other ECU manufacturers
With free MQB48 license. Bind Multi-prog and VVDI2 full version to the same Xhorse app account to use MQB48 NEC35XX function. 
Compatible with Xhorse solder-free adapters and cables


Read, Write and Clone TCU
Volkswagen A-udi Skoda DQ200, DQ250, VL381 TCU etc.
Porsche DL501 TCU
Ford Dodge and other MPS6 series TCU
BMW DKG, Mercedes-Benz VCS and other models TCU

Vehicle Engine Data Calculation and Processing
MED17/EDC17 data processing

Support Flexible Extension of Third-party Plug-ins
Support the development of third-party plug-ins and provide data processing and modification services

Read & Write MCU

Support reading and writing MCU of various brands including Renesas, Motolora, NXP, Infineon, etc.
Support certain encrypted chip reading and writing

Read & Write Vehicle Immo Module
Support Porsche, Land Rover, Mercedes-Benz EZS, VOLVO,
V-W MQB dashboard, A-UDI BCM2, etc.
Support modules including BMW EWS, CAS1 \CAS2\CAS3\CAS4+, FEM BDC, etc.
Support other common immo modules
Note:Compatible with Xhorse solder-free adapters and cables

Read & Write EEPROM
Support EEPROM and FLASH

Read & Write Vehicle Dashboard
Support dashboard of V-W, Honda, Hyundai, Kia, etc.

What is the difference between Multi-Prog and KT200?

The KT200 ECU Programmer and the Xhorse Multi-Prog Programmer are both sophisticated tools used in automotive programming for a variety of vehicles. Here's a comparison of their key features and functionalities:

KT200 ECU Programmer:

Versions: KT200 ECU Programmer from vxdas.com offers different versions including Auto, Full, and Offline Workstation.

Compatibility: Supports a wide range of ECU/TCU types including Bosch, Continental, Delco, Denso, Marelli, Siemens, Temic, etc.

Connection Modes: Offers multiple connection modes such as Bench, Boot, BDM/JTAG, and OBD.

Functionality: Capable of chip tuning, ECU maintenance, DTC code removal, EGR & DPF removal, IMMO OFF, speed limit release, and mileage correction.

Software: Works in both offline and online modes, with a user-friendly interface and support for multiple languages.

Updates: VXDAS.com KT200 ECU programmer provides free software updates without an annual fee, though new modules might be chargeable.

Xhorse Multi-Prog Programmer:

 Advanced Features: Incorporates licenses like the MQB48, offering enhanced functionality for BMW Bench Read ISN and supports ECU TCU Clone.

- Compatibility: Multi-Prog Programmer available at VXDAS.com compatible with a range of ECU models from various manufacturers and integrates seamlessly with other Xhorse tools.

- FunctionalityOffers advanced vehicle engine data calculation and processing for systems like MEDC17 and EDC17.

User Experience: Designed with a high-speed USB communication interface and  smart operation mode, enhancing the overall user experience.

Updates: Equipped with built-in update software, ensuring the device stays up-to-date with technological advancements.

Comparison Summary:

Range of Services: Both programmers offer a broad range of services, but the KT200 focuses more on a wide variety of connection modes and chip tuning functionalities, whereas the Multi-Prog  is  more  advanced in terms of licensing and compatibility with  other Xhorse tools.

User Interface: KT200 is noted for its user-friendly interface and offers an offline mode , which is a distinct feature compared to the Multi-Prog.

Updates and Compatibility: Both provide regular updates, but KT200 featured on vxdas.com emphasizes its free update policy. In contrast, Multi-Prog's compatibility with  other Xhorse tools could be a deciding factor for users already using Xhorse products.

 In essence, the choice between KT200 and Multi-Prog available at vxdas.com depends  on specific needs such as the range of vehicles and ECUs to be serviced, the preferred mode of operation (online vs. offline), and whether integration with other specific tools is required.

Xhorse Multi-Prog ECU and TCU List (Keep Updating):

ECU (Bench Mode)
VAG
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MG1CA811
3. BOSCH: MED17.1.6, MED17.1.21, MED17.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED1 7.5.5_TC1 766,
MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
4. BOSCH: EDC17C46, EDC17C74, EDC17CP24, EDC17CP44, EDC17CP54, EDC17U01, EDC17U05
5. BOSCH: MG1CS002一SPC5777, MD1 CP014_TC298TP, MG1 CS001_SPC5777, MG1 CS011 _SPC5777, MG1CS002_TC298TP,
MD1 CP004_TC298TP, MD1 CP004一SPC5777, MG1 CS111 一SPC5777, MD1 CS004_TC298TP, MG1 CS008_SPC5777, MG1CS008_TC298TP
6. CONTINENTAL: SIMOS8.3x, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

B-MW
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOSCH: MD1CP002_SPC5777, MG1 CS003_SPC5777 (B48, B58), MG1 CS201 _TC298TP (B38, B48, B58), MD1CS001_TC298TP,
MG1 CS024_TC298TP(B48, B58), MD1CP032_TC299
3. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC1 7CP45_Exx, EDC17C06, EDC17C56
4. BOSCH: MEI 7.2.1
5. BOSCH: MEVD1 7.2.3, MEVD1 7.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD17.2.9_Exx, MEVD17.2.G, MEVD17.2.G (N55),
MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD17.2.P_Fxx, MEVD17.2.K
6. OSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes B-enz
1. CONTINENTAL: SIM271 DE, SIM271 KE
2. BOSCH: MEI 7.7, MED17.7.3.1, MED1 7.7.1, MED1 7.7.2, MED1 7.7.3, ME1 7.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. BOSCH: CRD3x.x_TC1793, CRD3x.x_TC1 797
5. BOSCH: MD1CP001-SPC5777, MG1 CP002_SPC5777, MD1CS006_TC298TP

G-M
1. DELPHI: DCM3.7AP
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

N-issan
1. DENSO: 23740-3Nxxx_Gen1 SH72531
2. BOSCH:EDC17C84

H-yundai/K-ia
1. BOSCH: ME17.9.11, MEI 7.9.11.1
2. BOSCH:EDC17C53
3. BOSCH: MEG17.9.1 2_ECU

Ford
1. BOSCH: EDC17C70, EDC17CP65
2. BOSCH: ME17.0.3, ME17.8.5

Volvo
BOSCH: EDC17CP48, EDC1 7CP48_ver2, EDC1 7CP22

Other
1. AM_ME1 7.8.5,DOO_ME17.8.5
2. BOSCH: MG1CA007, MEI 7.8.8_TC1728, ME1 7.8.8_TC1 728_HW2, ME17.8.8_TC1 767, ME1 7.8.31, ME1 7.9.52
3. BOSCH: EDC1 7C55, EDC1 7C1 0, EDC1 7C1 0_TC1 796, EDC1 7C1 0_TC1 797, EDC1 7CP42, EDC1 7CP14, EDC17c81
4. BOSCH: MEVD1 7.8.4
5. BOSCH: MED17.8.1 0_TC1 728, MED17.8.1 0_TC1 728_Hw2, MED1 7.8.1 0_TC1 767
6. BOSCH: MD1 CS01 8, MG1 CS026_SPC58, MG1 CS032, MG1CS163, MD1CS01 2, MD1CS089, MD1CS069, MD1CS005_TC298TP,
MG1 CS01 5_TC277TP, MG1 CS01 6_TC275TP, MG1CS01 7_TC277TP, MG1CS01 8, MG1CS019, MG1CS088
7. CONTINENTAL: SID208, SID209, SID211, SID807EVO ⑧ DENSO: KH, ZY, SH70xx_275xxx-xxx

ECU (Boot Mode)

V-W series
1. SIMOS PCR2.1, EDC17c64
2. BOSCH: MED17.1.6, MED17.1.21, MED1 7.1.61, MED17.5, MED1 7.5.1, MED1 7.5.2, MED17.5.5_TC1 766,
MED1 7.5.5_TC1 767, MED1 7.5.20, MED1 7.5.21, MED1 7.5.25
3. BOSCH: EDC1 7C46, EDC1 7C74, EDC1 7CP24, EDC1 7CP44, EDC1 7CP54, EDC17U01, EDC17U05
4. BOSCH: SIMOS8.3X, SIMOS8.4x, SIMOS8.5x, SIMOS8.6X

B-MW series
1. CONTINENTAL: MSD80, MSV80, MSD81, MSD85, MSD87, MSV90
2. BOSCH: EDC1 7CP09_Fxx_TC1 796, EDC1 7C50_Exx, EDC17CP45_Exx, EDC17C06, EDC17C56
3. BOSCH: ME1 7.2.1
4. BOSCH: MEVD1 7.2.3.MEVD17.2_Fxx, MEVD1 7.2.4_Fxx(N20), MEVD1 7.2.6_Fxx, MEVD1 7.2.9_Exx, MEVD17.2.G, MEVD17.2.G(N55),
MEVD17.2.H, MEVD1 7.2.6_Fxx, MEVD1 7.2.P_Fxx, MEVD1 7.2.K
5. BOSCH: MEV17.2_TC1766, MEV1 7.2_TC1 767, MEV17.2_TC1796, MEV1 7.2.1

Mercedes B-enz series
1. CONTINENTAL: SIM271 DE,SIM271 KE
2. BOSCH: ME17.7, MED17.7.3.1, MED17.7.1, MED1 7.7.2, MED1 7.7.3, ME17.7.8
3. BOSCH: EDC17CP10, EDC17CP57, EDC17CP46, EDC17CP60
4. DELPHI: CRD2.x_MPC556x

Nissan series
BOSCH: EDC17C84

G-M series
1. DELPHI: MT80.MT80.1
2. DELCO: E37, E38, E39, E39A, E67, E78, E80, E82, E83, E83A, E83B, E84, E87, E92, E98

Hyundai/Kia series
1. DELPHI: MT86
2. DELCO: DCM6.2AP

Other
1. CONTINENTAL: SID208, SID209, SID211, SID807EVO, SID310
2. SDI21.1 ,SDI21.2,SDI21.3
3. BOSCH: ME1 7.3.0
4. MARELLI: 8DF, MM10JA

TCU (Bench Mode)
V-W
DL382, VL381, DL501 Genl, DL501 Gen2, DQ200Dxx, DQ200-G2, DQ200-G2_PQ, DQ200-MQB, DQ250-MQB, DQ250

Exx/Fxx BMW series
GETRAG DKG 436 Genl, GETRAG DKG 436 Gen2

Mercedes Benz series
VGS-FDCT, VGS2-FCVT, VGS2-FDCT

Ford series
1. ETRAG MPS6GETRAG
2. DPS6, DC4

TCU (Boot Mode)
Ford series
DPS6, DC4

Other
ZF 9HP

Xhorse Multi-Prog Feature:

Software: V1.0.4.0
Firmware: V1.0.8
Database version: V21
Free Update online.
Language: English, Chinese

Xhorse Multi-Prog Packing List:

1pc x power cable
1pc x MCU DB15 cable
1pc x USB cable
1pc x Main unit + VH13 adapter
1pc x Power adapter
1pc x MCU cable
1pc x ECU cable
1pc x VH24 interface adapter board
1pc x VH20 interface adapter board
1pc x OBD cable
1pc x ECU DB15 cable
5pcs x ECU harness plug replacement parts